Repairs to uPVC Windows
uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as aluminum or timber.
It is important to clean and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and also improve energy efficiency.
1. Broken Glass
If the glass in your window has been damaged, it can cause a huge amount of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good working order.
Single-pane windows are relatively easy to replace, and they typically fit into frames that were previously in use very easily. However If you have double pane windows that are held in place by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this case you'll need source some plastic spacers that assist the new pane to fit correctly into the frame of the window.
Wearing protective eyewear and thick gloves is essential if you plan to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any fragments of glass fall onto the fabric rather than on the floor, where they could be trodden under and cause further damage.
It's a great idea tape the gap once the glass is removed. This will keep drafts and water from entering your property until a professional comes out to repair the window. This will also provide an obstruction to prevent criminals from getting into your home. If the distance between the door and the window is substantial, you may want to use an alarm system that includes windows. This will give you the best of both.
2. Sagging
uPVC is a durable and energy efficient alternative to timber sash windows. As time passes, they may develop a number of problems that include sliding. A sagging window in uPVC can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from becoming worse.
To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need open the window to get to the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust them clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you're happy with the fit, tighten the screws until they stay in the right place.
If you are unable to move the hinges, you could need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to loosen. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows are waterproof and secure from draughts.
uPVC handles could also become loose. This is typically caused by screws that have been removed over time, but it could be due to the mechanism of the handle wears out. It's relatively simple to fix a loose uPVC hand. First, you'll need close the window and then perform an experiment to ensure that it fits. The corner joints of the sash need to align with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and reverse the mechanism back into the position it was in.
3. Water Leaks
If you wake up to wet floors and damp walls each time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home and impact your ability to regulate the temperature of your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.
This is a simple fix that can be done by anyone who is a DIYer with the skills. Based on the severity of the issue the old caulking might click here need to be removed before a fresh layer can be put on. When it comes to uPVC repair, you should be careful not to over-caulk. This will only make your window more difficult to clean and reduce its energy efficiency.
It is important to check that the drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious situations, you might have to consider replacing the window.
Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. The mold thrives in damp environments and can quickly spread throughout the house.
If the leakage is occurring between the double-glazed window, it is more likely that the issue is related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or slack and blow open with ease It could be hinges that are at fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.
Like any mechanical part hinges are prone to be damaged over time. It's very simple to change a window hinge but it's much easier if someone helps you to hold the frame.
Verify that the uPVC hinges open and close in the proper direction. Check for the arrows on each hinge to determine which direction the window should be opened.
The issue could be caused due to opening the window in the wrong way or by a poor installation in the factory. This issue can be fixed by sending us a photo via our website and we will be pleased to offer you advice.
It is also essential to ensure that the hinges are lubricated regularly. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the chance of windows getting stuck and stop corrosion. It is recommended to perform this every year. WD40 and other solvent based fluids are click here not recommended since they can damage the parts of your uPVC window.
5. Draughts
Draughts in upvc windows can be caused by a variety of various factors. The hinges can also become misaligned due to wear, which can cause a gap where the sash meets frame. They can be fixed by giving them a good cleaning, but when they're beyond click here repair, it may be necessary to get them re-aligned or replaced. Secondly the interlock, this is on the hinge side of the window and can be misaligned. Again, it is feasible to give them a thorough clean, however in some cases it might be necessary to have them replaced.
These seals can wear down or get damaged over time, allowing air to escape. more info Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures and decrease the possibility of draughts.
Lastly, one of the most effective methods to reduce draughts is by double glazed window repair using an draught excluder. These are usually fabric tubes that are filled with some type of filler. They can be positioned on the windowsill on top. These will keep your home warm by blocking out cold air.
With a little regular maintenance and repair windows made of upvc will provide a great level of insulation and security for your home. However, it is important to realize that all windows have a life span and there may come an point at which it is more efficient to replace them than repair them. So, if you're experiencing problems with your upvc windows, it is recommended to seek assistance from a professional as soon as you can.